A set of equipment for demonstrating didactic material in classrooms for up to 35 people. Contents: projector, screen (150×150 cm), laptop, teaching software for courses: — physics a complete set for vocational education; — electrical engineering.

Specifications: • Device dimensions: — length — 685 mm -width — 250 mm -height — 430 mm • Powered by AC 220V, 50Hz • Power consumption no more than 20 VA. • Scale in the form of a linear LED indicator. • Overall dimensions of the indicator scale 600 x 70 mm • Measurement of […]

Main technical characteristics: — dimensions – no more than 500x300x80 mm. Set contents: — demo screen (laminated flat screen with the possibility of magnetic fastening of optical elements and an applied measuring grid); — two semiconductor lasers (radiation wavelength — 0.63…0.68 µm; radiation power – not less than 1 mW); — two laser holders with […]

Main technical characteristics: — dimensions – no more than 300x200x200x mm; — weight – no more than 7 kg. Set contents: — gyroscope — stand for gyroscope Laboratory work “Gyroscopic effect” is being carried out. Precession of the axis of a rotating body.»

The installation is designed to experimentally determine the degree of emissivity and integral emissivity of a solid body and determine their dependence on temperature The instruments necessary for the work are included in the installation.

Composition: base, working field, elastic impact mechanism, washers with different masses. The installation allows you to study the Law of Conservation of Momentum and Energy during central and non-central impacts of bodies of the same and different masses.

Composition: laboratory frame with fastening elements, pulse counter block, pulse recording block. The counting characteristic is measured and the operating voltage of the meter is found (source KS1).

Composition: spatial structure, flask, compressor, panel with a set of capillaries and taps. Determination of the air viscosity coefficient and study of the dependence of the volume of air flowing through the capillary on the size of the capillary.

Composition: optical bench, halogen lamp in a housing, power supply, collecting lens, container with light filters, target, screen, set of stationary and mobile raters. Determination of the refractive index of a substance depending on the wavelength of radiation.

Main technical characteristics: — dimensions – 1000x800x800 mm. Set contents: — optical table, dimensions – 1000x800x170 mm. (composite three-layer structure; the upper working surface is perforated with M6 holes with a pitch of 50 mm); — vibration-resistant stand The installation can carry out scientific work on holography, interferometry, nano-optics, fiber optics and spectroscopy

«The set of laboratory equipment is intended for carrying out laboratory work in the section “Electricity and Magnetism” of the discipline “Physics” in secondary and higher educational institutions. Compound: 1. Desktop design; 2. Generator block (isolated signal generator of a special form, adjustable stabilized power supply “0…+15V”, stabilized voltage source “+15 V”, stabilized voltage source […]

Allows you to perform experiments in mechanics (kinematics, dynamics, friction, oscillations, Laws of conservation of energy and momentum), optics (geometric optics, diffraction, interference — special order), electricity (Laws of direct and alternating current, oscillations). The stand is equipped with modern electronic measuring instruments.

A virtual laboratory bench is software for a personal computer that allows you to study the design and operating principle of various instruments and technological installations by interacting with their realistic interactive 3D models. An interactive virtual model is an opportunity to easily study phenomena invisible to the naked eye, and devices, mechanisms and systems […]

Set of mechanical and optical elements

Specifications: — Power supply: AC 220V — Execution: desktop. -Dimensions (WxDxH): 660x180x310 — Seven-segment LED indication: sign and three digits. — Height of the displayed character (one digit): not less than 120 mm. — Indication color: red. — Measurement of direct currents in the range of 0.001÷ 10 A. — Measuring subranges: 0.2A; 2A; 10A

Main technical characteristics: — dimensions – no more than 700x100x150 mm. Set contents: — optical bench; — semiconductor laser; — Web camera; — lens; — Young screen (opaque plate 100×100 mm with two holes); — adjustable optics holder; — raters; The laboratory work “Jung’s Experiment” must be performed at the stand.

Main technical characteristics: — dimensions – no more than 1000x300x300 mm; — weight – no more than 3 kg. Set contents: — inclined plane — geometrically identical cylinders of equal mass with different moments of inertia The laboratory work “Rolling down solid and hollow cylinders of the same mass and radius from an inclined plane” […]

Composition: control unit with a compressor, pressure and air flow meter, unit with a capillary, flow meter and operating mode control. Purpose: Determination of air viscosity coefficient.

Composition: laboratory frame with fastening elements, pulse counter block, pulse recording block. Using a gas-discharge counter, the frequency distribution of the number of pulses in a series of experiments (100-500 experiments) is measured at a given average value. Comparison of the resulting distribution with Poisson’s law (source — secondary decay from the effects of cosmic […]

The setup makes it possible to experimentally demonstrate the uncertainty when trying to estimate the magnitude of the momentum of a microparticle and its coordinate (using the example of a photon). During laboratory work, a real-time picture of the laser radiation intensity distribution is observed on the TFT display screen after its beam passes through […]

Composition: adjustable base, spatial structure, electronic stopwatch, electronic time sensor, electromagnetic stopper, two bodies with constant and variable moments of inertia, container. The installation allows you to determine the moment of inertia of various bodies rolling down an inclined plane. The installation is equipped with an electronic system for automatic counting of movement time.

Composition: 2 optical benches, a halogen lamp in a housing, a mercury lamp in a housing, a single power supply, a container with filters, 2 diffraction gratings, ruler screens, a set of stationary and moving raters. Determination of the period of the diffraction grating (light source — mercury lamp) and the transmission range of light […]

Intended for studying the stages of manufacturing optical products and studying their characteristics, as well as design technologies for optical lenses and prisms. The workshop allows you to: — grinding and roughing operations (grinding, grinding, rounding, faceting, blocking, finishing grinding); — polishing operations (polishing, varnishing, unblocking); — finishing operations (washing, coating, control). Compound: 1. Grinding, […]

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.

«The set of laboratory equipment is intended for carrying out laboratory work in the section “Electricity and Magnetism” of the discipline “Physics” in secondary and higher educational institutions. Compound: — desktop construct; — generator block (isolated signal generator of a special form, adjustable stabilized power supply “0…+15V”, stabilized voltage source “+15 V”, stabilized voltage source […]

Virtual stands-emulators of real laboratory installations. An arbitrary choice is possible from the list: 1. Virtual bench emulator “Research of electrostatic fields” 2. Virtual emulator “Determination of capacitance of a capacitor” 3. Virtual bench emulator “Determination of conductor resistance using the Wheatstone bridge method” 4. Virtual emulator stand “Determination of the electromotive force of a […]

A virtual laboratory bench is software for a personal computer that allows you to study the design and operating principle of various instruments and technological installations by interacting with their realistic interactive 3D models. An interactive virtual model is an opportunity to easily study phenomena invisible to the naked eye, and devices, mechanisms and systems […]