Heat and ventilation
Продукция
Heat and ventilation
Standard set of training equipment “Ventilation systems” VENT-08-5LR-01
Composition: blower frame, pipeline system, measurement system with measuring instruments for visual observations and measurements of flow parameters and other quantities, educational and methodological support with a description of 5 laboratory works. List of laboratory works: 1. Study of instruments and methods for determining pressure. 2. Study of velocity distribution diagrams (based on dynamic pressure) […]
Standard set of training equipment “Ventilation systems” VENT-017-13LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]
Standard set of training equipment “Ventilation systems” VENT-017-16LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]
Virtual copy of the VENT stand (VENT-VK)
“The virtual laboratory includes a set of didactic software for conducting virtual laboratory work: 1. Study of instruments and methods for determining pressure 2. Study of velocity distribution diagrams (based on dynamic pressure) when air flows through a circular pipeline using a pitot tube. Determination of flow rate using velocity diagram 3. Studying the method […]
Training stand “Intake ventilation system” VENT-PR-019-17LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – air intake grille; — air valve; – filter box; – duct heater; – a fan with a device for regulating fan speed and measuring it; – noise suppressor; – pipeline system; – constant flow valve; – diffusers; – differential pressure […]
Training stand “Exhaust ventilation system” VENT-VT-019-13LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – exhaust hoods; – constant flow valve; – pipeline system; – a fan with a device for regulating fan speed and measuring it; – air valves; – differential pressure sensor; – iris diaphragm; – manual valves. List of laboratory works: 1. […]
Training stand “Installation and adjustment of ventilation systems”
The stand is designed for training in the installation, assembly and commissioning of ventilation systems. Compound: – frame structure with points for fastening elements; — air valve; – filter box; – duct heater; — fan; – noise suppressor; – pipeline system; – constant flow valve; – diffusers; – differential pressure sensor; – iris diaphragm; – […]
Training stand “Use of a heat pump for utilization of low-temperature heat” TN-UNT-020-5LR
The stand is designed for laboratory work to study methods of using low-temperature heat, the energy characteristics of a heat pump and its thermodynamic cycle. The stand allows you to study systems for recycling the thermal energy of air emitted by ventilation systems of civil and industrial facilities. The stand simulates the thermal part of […]
Standard set of training equipment “Automation of heat, gas supply and ventilation systems” ATGSV-09-11LR-01
The package includes: – Training stand “Automation of heat and gas supply and ventilation systems”; – Device for input/output of information into a PC – an ADC-DAC board of type E14–140 or an analogue, can be installed on a bench; – Control PC of the stand (laptop); — Manual; – Guidelines for conducting laboratory work.
Standard set of training equipment “Autonomous automated heating system” ASO-03
Operating automated water heating system in a tabletop version. Does not require connection to heat, water supply and sewer networks. The heating system is monitored and controlled using a personal computer. Designed to study the design and operating principle of an autonomous water heating system, experimental study of processes in the heating system, automatic and […]
Laboratory installation “Automated heating system” ASO-04, modular floor-mounted design
Operating single-circuit automated water heating system in a modular floor-mounted design. The system is autonomous and does not require connection to heating, water supply and sewerage networks. The installation can be freely moved indoors. The heating system is monitored and controlled using a personal computer placed on a console table. The installation is designed to […]
Laboratory installation “Automated 2-circuit heating system” ASO-05, modular floor-mounted design
Operating double-circuit automated water heating system based on an independent circuit with a heat exchanger in a modular floor-mounted design. The installation is autonomous, does not require connection to heating, water supply and sewer networks, it can be freely moved indoors. The installation is monitored and controlled by a controller for heating systems. Information from […]
Standard set of training equipment “Autonomous automated heating system” ASO-06
An automated water heating system in a floor-mounted version is designed to study the structure and operating principle of an autonomous water heating system, experimental study of processes in the heating system, automatic and manual balancing of the heating system, and determination of the characteristics of heating devices. Does not require connection to heat, water […]
Laboratory installation “Automated boiler room for liquid and gaseous fuels” AK-01
Designed to study the structure and operating principle of an automated boiler room, experimental research of processes and operation of automation under conditions of changes in various technological parameters. Can be used for laboratory work in higher, secondary and vocational educational institutions, during training and retraining of boiler room operators and dispatchers. Technical capabilities: — […]
Laboratory stand «APCS of boiler room»
Designed to study the operation of an automatic boiler room control system. The stand contains a model of a boiler room with elements of industrial automation.
Laboratory installation “Automated solid fuel boiler house” AK-T-02
Designed to study the design and principle of operation of a solid fuel boiler room, experimental study of processes and operation of automation under conditions of changes in various technological parameters. Can be used for laboratory work in higher, secondary and vocational educational institutions, during training and retraining of boiler room operators and dispatchers. Technical […]
Laboratory stand “Installation and adjustment of heating systems” MiRSO-01, modular floor-mounted design
The stand is intended for practicing installation skills (change of configuration, repair, replacement of components), preparation for operation (pressure testing, testing) and adjustment of heating systems. The delivery set includes an installation that is a functioning autonomous heating system; additional components and elements for changing the system; consumable set of pipes and fittings; tools for […]
Laboratory installation “Automated heating point” ATP-01
To study the design and operating principle of automated heating units, experimental research of processes in heating systems, hot water supply systems, remote monitoring and control of the operation of heating units. The complex can be used to conduct laboratory work in the courses “Heat supply”, “Heating and heating systems”, “Thermal measurements” and “Automation of […]
Laboratory installation “Measurements and energy accounting in heat supply systems” T-IiU-En-01
The installation is intended for experimental research and laboratory work on separate metering of thermal energy consumed from the heating network and spent on the hot water supply system (DHW). Functionality: • Preparation of hot water supplied to the heating network at a given temperature • Circulation of hot water in the heating network of […]
Standard set of educational equipment “Heat supply and heating devices” TSOP-ST-13LR-10
The kit is intended for laboratory work by a group of 2–3 people. The delivery set includes: a stand, an instruction manual and a manual for performing laboratory work. The stand represents a frame structure with a panel placed on it, where control and measuring instruments and guide equipment are mounted; next to the panel […]
Standard set of educational equipment “Thermal and hydraulic characteristics of heating devices” TGKhPTO-9LR-010
Designed for the specialty “Heat and gas supply and ventilation” and related ones. The stand is a frame structure with three types of heating devices installed in thermally insulated cells: convector, radiator, smooth pipe. Water is heated to a given temperature in a boiler and supplied to the piping system and heating devices by a […]
Standard set of training equipment “Use of automation and dispatching tools in heating points of centralized heating systems of buildings”
Designed to study automated process control systems (automated process control systems) for boiler houses with steam and hot water boilers. Full-scale automation of heating points and boiler houses requires the construction of a two-level automated process control system. The lower level of the system is the level of controllers, at which tasks such as implementing […]
Typical set of educational equipment “Heat pump-1”
A working model of a heat pump with a compressor, heat exchangers and instruments for measuring temperature, pressure, current, voltage, and electricity consumption placed on a vertical panel. Execution options:
Typical set of educational equipment “Heat pump-2”
A desktop operating model of a heat pump in a simplified version with the ability to measure temperature, pressure, and electrical parameters.
Stand-simulator “Heat pump using geothermal low-potential energy” (based on heat pumps)
A working model of a heat pump with a compressor, heat exchangers, flow-through storage tanks with water, valves for water distribution and instruments for measuring temperature, pressure, current, voltage, and electricity consumption located on a vertical panel. Simulation of heat exchange with underground or similar low-potential heat sources.
Virtual laboratory stand “Ventilation systems”
A virtual laboratory bench is software for a personal computer that allows you to study the design and operating principle of various instruments and technological installations by interacting with their realistic interactive 3D models. An interactive virtual model is an opportunity to easily study phenomena invisible to the naked eye, and devices, mechanisms and systems […]
Virtual laboratory stand “Air conditioner repair”
A virtual laboratory bench is software for a personal computer that allows you to study the design and operating principle of various instruments and technological installations by interacting with their realistic interactive 3D models. An interactive virtual model is an opportunity to easily study phenomena invisible to the naked eye, and devices, mechanisms and systems […]
