A set of equipment for demonstrating didactic material in classrooms for up to 35 people. Contents: projector, screen (150×150 cm), laptop, teaching software for courses: — life safety in production conditions; — building construction; — Construction Materials; — construction machines; — sling work; — construction production technology (SPO); — technology of construction processes (vpo); — […]

Designed to study the design and principle of operation of a solid fuel boiler room, experimental study of processes and operation of automation under conditions of changes in various technological parameters. Can be used for laboratory work in higher, secondary and vocational educational institutions, during training and retraining of boiler room operators and dispatchers. Technical […]

The stand allows you to study the operation of dynamic type pumps: centrifugal with an open impeller, centrifugal with a closed impeller, vortex, measure the pressure and flow characteristics of pumps and a pumping station based on a combination of pump connections, set and determine the pressure and fluid flow at various points in the […]

The kit is intended for laboratory work by a group of 2–3 people. The delivery set includes: a stand, an instruction manual and a manual for performing laboratory work. The stand represents a frame structure with a panel placed on it, where control and measuring instruments and guide equipment are mounted; next to the panel […]

The stand is a supporting structure on which elements of the heating system of the building are installed, a system of pipelines and shut-off and control valves will allow you to assemble various heating schemes: a vertical single-pipe pumped water heating system with top wiring, a vertical single-pipe pumped water heating system with bottom wiring. […]

Purpose of the stand: the stand is designed to study automation and dispatching systems in water supply systems of various buildings and structures using automated systems based on the SCADA system. Information is transferred using GSM/GPRS modems. A feature of urban water supply systems is the significant distance of objects from each other. The dispatch […]

The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]

The complex is designed to study the wastewater treatment process and its main elements. The ability to take a water sample after each stage of purification has been implemented, which helps to control the quality of purified water as it passes through the settling tank and filters. Allows you to study the disinfecting effects of […]

Floor-standing version of the stand. The stand contains: a frame structure with an instrument panel, a process tank, two centrifugal pumps (pumping unit: plastic and stainless steel), a system of pipelines and taps, a tank for working fluid (water), a frequency regulator for controlling the shaft speed of one of the pumps; 2 flow meters […]

Designed to study the structure and operating principle of an automated boiler room, experimental research of processes and operation of automation under conditions of changes in various technological parameters. Can be used for laboratory work in higher, secondary and vocational educational institutions, during training and retraining of boiler room operators and dispatchers. Technical capabilities: — […]

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.

Designed for the specialty “Heat and gas supply and ventilation” and related ones. The stand is a frame structure with three types of heating devices installed in thermally insulated cells: convector, radiator, smooth pipe. Water is heated to a given temperature in a boiler and supplied to the piping system and heating devices by a […]

The complex allows you to study the structure of automatic control systems, instruments and characteristics of control system elements, programming and application of an industrial controller, and measure system operating parameters in dynamic mode. The package includes: – stand; – laptop with software; – guidelines with a description of laboratory work; – passport, stand operating […]

The complex is designed to study the technology of wastewater drainage and connections that meet the Russian standard. Transparent pipe elements are used to trace the flow of wastewater. Allows you to gain practical skills in the installation and dismantling of sewerage systems, their repair, as well as study: the inlet pipe — outlet pipe […]

The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]

Floor-standing version of the stand. The stand contains: a frame structure with an instrument panel, a process tank, two centrifugal pumps (pumping unit: plastic and stainless steel), a system of pipelines and taps, a tank for working fluid (water), a frequency regulator for controlling the shaft speed of one of the pumps; 2 flow meters […]

The training stand is designed to study the design and operating principles of water supply and heating systems with an electric boiler, and to determine the operating characteristics of heating devices in laboratory conditions. Compound: ̶ Electric boiler with temperature control device circulation pump ̶ Circulation pump with frequency regulation ̶ 3 heating units ̶ […]

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall. Poster configuration options:

Designed to study the functioning of heating system automation elements. Allows: • Investigate the processes that occur during the operation of autonomous heating systems in conditions of changing weather conditions and various settings for the values ​​of technological heating parameters depending on the season, day of the week and time of day. • Simulate various […]

Designed to study the design and operation of a 2-circuit household gas boiler, simulate faults and study diagnostic methods.

Purpose of the stand: the stand is designed to study metering and control devices for water flow and pressure in water supply systems of various buildings and structures. The stand is a hydraulic system that allows you to measure fluid flow and pressure using various devices. Consists of a liquid supply system and a system […]

The complex is designed to study the process of water purification from suspended particles. The ability to take a water sample after each stage of purification has been implemented, which helps to control the quality of purified water as it passes through the settling tank and filters. Allows you to study the disinfecting effects of […]

The stand consists of a polymer-coated metal frame on which the following are mounted: – air intake grille; — air valve; – filter box; – duct heater; – a fan with a device for regulating fan speed and measuring it; – noise suppressor; – pipeline system; – constant flow valve; – diffusers; – differential pressure […]

Floor-standing version of the stand. The stand contains: a frame structure with an instrument panel, a process tank and a consumer simulator tank, two centrifugal pumps (pumping unit: plastic and stainless steel), a system of pipelines and taps, a tank for working fluid (water), a frequency regulator for controlling the speed of one shaft from […]

The stand is designed to study the technology of installation of plumbing equipment, hot and cold water supply lines, drainage and wastewater disposal lines, connections and fittings that meet the Russian standard. The stand is completely autonomous — it does not require water supply or sewerage.

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.

Designed to study the design and operation of a single-circuit domestic gas boiler AOGV, simulate faults and study diagnostic methods.