Purpose: The training stand is designed to carry out work to study the operating parameters and design of the components of the coulter group of the seeder, to study the influence of the method of attaching the coulter on the quality and operational performance of the seeder. Description: The stand is a prefabricated metal platform […]

Purpose: The training simulator is designed to carry out a set of practical work to study the general structure and main characteristics of a machine for planting potatoes, the design of its main components, mechanisms, principles of their functioning and operating modes, as well as the formation of initial skills in maintenance and repair. Description: […]

Purpose: The tablet is intended for studying the design and operating principle of seeding devices. Description: The tablet is a natural sample of sowing devices, mounted on an MDF base, with a color graphic film pasted on. Composition: base (front panel — MDF with a backing made of printing film glued to it with a […]

Purpose: The stand-tablet is intended for studying the principle of operation of devices and components of grain seeders in the training course “Seeding Machines”. Description: The stand-tablet is a frame structure, on the front panel of which a film is glued with images of the main types of grain seeders. Compound: — frame structure: PVC […]

Purpose: The demonstration model is intended to study the components and design of sowing machines. Description: The demonstration model represents scaled seeding machines installed on a sub-layout. Contents: sub-layout, mock-ups of sowing machines: section of a grain seeder, section of a vegetable seeder, section of a seeder for sowing potatoes, protective plexiglass cap, passport. Technical […]

Purpose: The training stand is designed to carry out work to study the operating parameters and design of the components of the seeder weighing devices, to study the dependence of the seed sowing rate on the gear ratio of the seeder gearbox and the length of the sowing device coil. Description: The stand is a […]

Purpose: The training simulator is designed to carry out work on studying the general structure and main characteristics of a stubble seeder for continuous seeding, the design of its main components, mechanisms, principles of their functioning and operating modes. Description: The stand is a complete stubble seeder SKP (SZS), adapted for the educational process, mounted […]

Purpose: The tablet is intended for studying the design of the grain-grass seeder SZ-3.6 and the components of the working parts of the seeder. Description: The tablet is a natural sample of the working parts of the SZ-3.6 seeder, on a metal base. The tablet is equipped with a banner on a metal bracket. Composition: […]

Purpose: The stand-tablet is intended for studying the principle of operation of devices and components of vegetable seeders in the training course “Seeding Machines”. Description: The stand-tablet is a frame structure, on the front panel of which a film with images of the main types of vegetable seeders is pasted. Compound: — frame structure: PVC […]

Purpose: The demonstration model is intended to study the components and design of a grain seeder. Description: The demonstration model is a scaled model of a grain seeder installed on a sub-layout. Contents: sub-layout, model of grain seeder, protective plexiglass cap, passport. Technical characteristics of the stand: Sub-layout material – laminated chipboard, not less than […]

Purpose: The training stand is designed to carry out work to study the operating parameters and design of the component elements of a section of a pneumatic seeder, to study the dependence of seed weighing on the seeder adjustments. Description: The stand is a metal base, painted with polymer wear-resistant paint, with a section of […]

Purpose: The training simulator is designed to study the general structure and main characteristics of a pneumatic seeder, the design of its main components, mechanisms, principles of their functioning and operating modes. Description: The stand is a section of a pneumatic seeder, adapted for the educational process, mounted on a metal base with an electric […]

Purpose: The tablet is intended for studying the design of the components of the working bodies of sowing machines. Description: The tablet is a natural sample of the working parts of the main sowing machines, mounted on a combined base made of MDF and a metal base, painted with wear-resistant polymer paint. A printed film […]

Purpose: The stand-tablet is intended for studying the principle of operation and purpose of sowing machines in the training course “Seeding Machines” Description: The stand-tablet is a frame structure, on the front panel of which a film is glued with images of the main types of sowing machines. Compound: — frame structure: PVC profile with […]

Purpose: The demonstration model is intended to study the components and design of a vegetable seeder. Description: The demonstration model is a scaled model of a vegetable seeder installed on a sub-layout. Contents: sub-layout, model of vegetable seeder, protective plexiglass cap, passport. Technical characteristics of the stand: Sub-layout material – laminated chipboard, not less than […]

Purpose: The training stand is designed to carry out work to study the operating parameters and design of the components of the automatic dosing system for mineral fertilizers and seeds. Description: The stand is a metal base, painted with polymer wear-resistant paint, with a technical set of a stubble seeder installed on it with sowing […]

Purpose: The training simulator is designed to carry out work on adjusting the stubble seeder, as well as to study the general structure and main characteristics of the machine, the design of its main components, mechanisms, principles of their functioning and operating modes. Description: The stand is an SKP stubble seeder, adapted for the educational […]

Purpose: The tablet is intended for studying the design of the components of the seeder gearbox. Description: The tablet is a natural sample of the SZG gearbox, mounted on a metal base painted with polymer wear-resistant paint. The tablet is equipped with a banner on a metal bracket. Composition: a banner made of wear-resistant material […]

Purpose: The stand-tablet is intended for studying the principle of operation of devices and components of a pneumatic seeder in the training course “Seeding Machines”. Description: The stand-tablet is a frame structure, on the front panel of which a film is glued with an image of the main components of a pneumatic seeder. Compound: — […]

Purpose: The demonstration model is intended to study the components and design of a seeder for sowing potatoes. Description: The demonstration model is a scaled model of a seeder for sowing potatoes, installed on a sub-layout. Contents: sub-layout, model of seeder for sowing potatoes, protective plexiglass cap, passport. Technical characteristics of the stand: Sub-layout material […]

Purpose: The training stand is designed to carry out work to study the operating parameters and design of the component elements of a section of a pneumatic seeder, study the dependence of seed sowing on seeder adjustments, and provide seeding control. Description: The stand is a metal base, painted with polymer wear-resistant paint, with a […]

Purpose: The training simulator is designed to carry out work on adjusting a pneumatic seeder, as well as to study the general structure and main characteristics of the machine, the design of its main components, mechanisms, principles of their functioning and operating modes. Description: The stand is a section of a pneumatic seeder, adapted for […]

Purpose: The tablet is designed to study the design of the components of the seeder gear mechanism. Description: The tablet is a natural example of a seeder gear mechanism, mounted on a metal base painted with polymer wear-resistant paint. The tablet is equipped with a banner on a metal bracket. Composition: a banner made of […]

Purpose: The training simulator is intended for practical work on studying the structure of the seeder of the SZ-3.6 seeder, the principles of its operation and operating modes, as well as the formation of initial maintenance skills. Description: The stand is a block of sowing devices of the SZ-3.6 seeder on shafts, with adjusting handles. […]

Purpose: The tablet is intended for studying the design of the components of the automatic seeder disconnector. Description: The tablet is a natural example of a seeder disconnector, mounted on a metal base painted with polymer wear-resistant paint. The tablet is equipped with a banner on a metal bracket. Composition: a banner made of wear-resistant […]

Purpose: The training simulator is designed to study the general structure and main characteristics of a pneumatic seeder, the design of its main components, mechanisms, principles of their functioning and operating modes. Description: The stand is a section of a pneumatic seeder, adapted for the educational process, mounted on a metal base with an electric […]

Purpose: The tablet is designed to study the design and operation of the grain seeder opener. Description: The tablet is a natural sample of a grain seeder coulter, mounted on a metal base painted with polymer wear-resistant paint. The tablet is equipped with a banner on a metal bracket. Composition: a banner made of wear-resistant […]