Heating and ventilation systems
Продукция
Heating and ventilation systems
Standard set of training equipment “Ventilation systems” VENT-017-13LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]
Standard set of training equipment “Ventilation systems” VENT-017-16LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]
Training stand “Intake ventilation system” VENT-PR-019-17LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – air intake grille; — air valve; – filter box; – duct heater; – a fan with a device for regulating fan speed and measuring it; – noise suppressor; – pipeline system; – constant flow valve; – diffusers; – differential pressure […]
Training stand “Exhaust ventilation system” VENT-VT-019-13LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – exhaust hoods; – constant flow valve; – pipeline system; – a fan with a device for regulating fan speed and measuring it; – air valves; – differential pressure sensor; – iris diaphragm; – manual valves. List of laboratory works: 1. […]
Standard set of training equipment “Ventilation systems with air conditioning” VENT-KOND-017-21LR
The training stand should be intended for carrying out laboratory work on the study of elements of ventilation systems, methods of regulating and monitoring parameters in ventilation systems, methods of air cooling, determining the hydraulic resistance of elements of ventilation systems: pipes of various shapes, dampers, tees, etc. List of laboratory works: 1. Study of […]
Training stand “Installation and adjustment of ventilation systems”
The stand is designed for training in the installation, assembly and commissioning of ventilation systems. Compound: – frame structure with points for fastening elements; — air valve; – filter box; – duct heater; — fan; – noise suppressor; – pipeline system; – constant flow valve; – diffusers; – differential pressure sensor; – iris diaphragm; – […]
Standard set of training equipment “Automation of heat, gas supply and ventilation systems” ATGSV-09-11LR-01
The package includes: – Training stand “Automation of heat and gas supply and ventilation systems”; – Device for input/output of information into a PC – an ADC-DAC board of type E14–140 or an analogue, can be installed on a bench; – Control PC of the stand (laptop); — Manual; – Guidelines for conducting laboratory work.
Standard set of training equipment “Use of automation and dispatching tools in heating points of centralized heating systems of buildings”
Designed to study automated process control systems (automated process control systems) for boiler houses with steam and hot water boilers. Full-scale automation of heating points and boiler houses requires the construction of a two-level automated process control system. The lower level of the system is the level of controllers, at which tasks such as implementing […]
Standard set of educational equipment “Thermal and hydraulic characteristics of heating devices” TGKhPTO-9LR-010
Designed for the specialty “Heat and gas supply and ventilation” and related ones. The stand is a frame structure with three types of heating devices installed in thermally insulated cells: convector, radiator, smooth pipe. Water is heated to a given temperature in a boiler and supplied to the piping system and heating devices by a […]
Standard set of educational equipment “Heat supply and heating devices” TSOP-ST-13LR-10
The kit is intended for laboratory work by a group of 2–3 people. The delivery set includes: a stand, an instruction manual and a manual for performing laboratory work. The stand represents a frame structure with a panel placed on it, where control and measuring instruments and guide equipment are mounted; next to the panel […]
Stand-simulator “Elements of automation of heating systems” ElASO-01
Designed to study the functioning of heating system automation elements. Allows: • Investigate the processes that occur during the operation of autonomous heating systems in conditions of changing weather conditions and various settings for the values of technological heating parameters depending on the season, day of the week and time of day. • Simulate various […]
Standard set of training equipment “Autonomous automated heating system” ASO-03
Operating automated water heating system in a tabletop version. Does not require connection to heat, water supply and sewer networks. The heating system is monitored and controlled using a personal computer. Designed to study the design and operating principle of an autonomous water heating system, experimental study of processes in the heating system, automatic and […]
Laboratory installation “Automated heating system” ASO-04, modular floor-mounted design
Operating single-circuit automated water heating system in a modular floor-mounted design. The system is autonomous and does not require connection to heating, water supply and sewerage networks. The installation can be freely moved indoors. The heating system is monitored and controlled using a personal computer placed on a console table. The installation is designed to […]
Laboratory installation “Automated 2-circuit heating system” ASO-05, modular floor-mounted design
Operating double-circuit automated water heating system based on an independent circuit with a heat exchanger in a modular floor-mounted design. The installation is autonomous, does not require connection to heating, water supply and sewer networks, it can be freely moved indoors. The installation is monitored and controlled by a controller for heating systems. Information from […]
Standard set of training equipment “Autonomous automated heating system” ASO-06
An automated water heating system in a floor-mounted version is designed to study the structure and operating principle of an autonomous water heating system, experimental study of processes in the heating system, automatic and manual balancing of the heating system, and determination of the characteristics of heating devices. Does not require connection to heat, water […]
Simulator “Heating system controller”
Designed to study the functioning of heating system controllers. Part of the equipment: 1. Electronic controller of heating systems with an expansion module for output devices. 2. Outside air temperature selector. 3. Season (winter/summer) and time of day (day/night) adjuster. 4. Fault indicators for circulation and make-up pumps. 5. Mixing valve with servo drive. 6. […]
Laboratory installation “Automated boiler room for liquid and gaseous fuels” AK-01
Designed to study the structure and operating principle of an automated boiler room, experimental research of processes and operation of automation under conditions of changes in various technological parameters. Can be used for laboratory work in higher, secondary and vocational educational institutions, during training and retraining of boiler room operators and dispatchers. Technical capabilities: — […]
Laboratory installation “Automated solid fuel boiler house” AK-T-02
Designed to study the design and principle of operation of a solid fuel boiler room, experimental study of processes and operation of automation under conditions of changes in various technological parameters. Can be used for laboratory work in higher, secondary and vocational educational institutions, during training and retraining of boiler room operators and dispatchers. Technical […]
Laboratory installation “Automated heating point” ATP-01
To study the design and operating principle of automated heating units, experimental research of processes in heating systems, hot water supply systems, remote monitoring and control of the operation of heating units. The complex can be used to conduct laboratory work in the courses “Heat supply”, “Heating and heating systems”, “Thermal measurements” and “Automation of […]
Training stand “Elements and equipment of heating systems”
Composition: sectional view of an expansion tank, sectional view of a circulation pump with a wet rotor, pressure gauge, thermomanometer, manual flow regulators, thermostatic temperature controllers, mixing valves with drives, heat exchanger, connection units for heating devices, safety group, manifold group for heating with flow meters, modules quick installation, heat meter.
Set of virtual stands “Heat supply and heating devices” (6 in one)
The virtual training complex contains 6 virtual training stands: • Virtual laboratory stand “Gas Heat Engineering” • Virtual laboratory stand “Thermal engineering of liquids” • Virtual laboratory stand “Autonomous automated heating system” • Virtual stand “Heat supply and heating devices” • Virtual laboratory stand “Heat pump” • Virtual stand “Automated heating point” A virtual laboratory […]
Virtual laboratory stand “Ventilation systems”
A virtual laboratory bench is software for a personal computer that allows you to study the design and operating principle of various instruments and technological installations by interacting with their realistic interactive 3D models. An interactive virtual model is an opportunity to easily study phenomena invisible to the naked eye, and devices, mechanisms and systems […]
Virtual stand “Structure and design of a split air conditioning system with an inverter compressor” SUSS-IK-VK
The virtual training stand “Structure and design of a split air conditioning system with an inverter compressor” includes a set of didactic software for studying the components and operation of an air conditioning system based on an inverter compressor. A virtual interactive three-dimensional model of the air conditioner provides the ability to visually observe the […]
