Ampere force demonstration setup (a round conductive rod capable of riding on horizontal busbars): It works in a magnetic field created by an electromagnet. Characteristics: -Rod length, mm……………200 ± 5 -Maximum permissible operating current, A, ……..10 -The edges of the conductive busbars are equipped with stops that limit the movement of the rod and prevent […]

The installation allows you to: study the laws of rotational motion and determine the moment of inertia of the disk using the dynamic method. Compound: — an adjustable base (a base made of laminated chipboard with horizontal level adjustment) with a bracket holder pipe attached to it, — photoelectric sensor (fixed to the base), — […]

To measure the horizontal component of the induction of the Earth’s magnetic field, a tangent galvanometer is used. An adjustable constant voltage source and a measuring device (pointer miliammeter) are included in the installation.

The installation allows you to: experimentally determine the force of surface tension of a liquid by ring separation method. Compound: — adjustable base (base made of laminated chipboard with horizontal level adjustment) with the installation head unit holder pipes attached to it, — ring with rope for suspension, — a head unit with an electronic […]

A desktop setup designed to study the oscillations of two coupled pendulums. The installation is intended for demonstration and laboratory work to determine the parameters of the period, frequency and coupling force of pendulums

The installation can be used in conjunction with the laboratory installation “Study of air viscosity”. The kit contains an electronic stopwatch, ruler, table bracket, water container, thermometer and barometer. The installation is designed to determine the mean free path and effective diameter of gas molecules.

Determination of the coefficient of mutual induction of two solenoids, comparison of the results with those calculated theoretically. The necessary signal sources and measuring instruments are included in the installation.

Can be used to demonstrate electromagnetism experiments: -Behavior of a current-carrying circuit in a uniform magnetic field. -Eddy currents and their braking effect. — Ampere power. -The phenomenon of electromagnetic induction — The principle of operation of the electric motor. — DC generator.

Designed to demonstrate the principles of operation of an electric motor and DC generator. Compound: • Permanent magnet • Model of an electric motor (generator) without a core *Optionally can be supplied: multimeter and constant voltage source

Designed for experimental determination of the ratio of the electron charge to its mass using the magnetron method The necessary voltage sources and measuring instruments are included in the installation.

Installing a desktop version will allow you to 1. Study the physical meaning of the universal gas constant. 2. Study possible isoprocesses in gases, write down the equations of these processes, and construct their diagrams. 3. Study the definition of mole and molar mass of a substance. The installation is designed to determine the universal […]

The benchtop laboratory setup is designed to study Hooke’s laws and conservation of energy. It is a weight suspended on a support using a spring, and includes a stopwatch.

Designed to provide visual demonstrations of the Peltier effect in a lecture hall. Demonstration of the phenomenon of heating on one side and cooling on the other side of the Peltier module when an electric current is passed through it, demonstration of the phenomenon of the occurrence of thermoEMF while maintaining a temperature difference between […]

The desktop installation is designed to determine the speed of a bullet or other body fired horizontally. The installation consists of three functional parts — 1. catapult for launching the body, 2. measuring unit-velocity recorder, 3. ballistic pendulum with a scale.

The desktop installation is designed to experimentally determine changes in entropy during first-order phase transition using the example of melting tin/plasticine/paraffin. The kit consists of a crucible, a measuring thermometer, a heating element, a stopwatch

Study of the properties of an inductor and capacitor on alternating current; Study of the properties of a series circuit with active and reactance at a fixed frequency at various ratios of reactance; Checking the validity of Ohm’s law for an alternating current circuit. The necessary signal sources and measuring instruments are included in the […]

Designed to demonstrate experiments on visualizing magnetic field lines created by permanent magnets and current-carrying conductors of various configurations. Compound: — Straight conductor — Ring shaped conductor — Solenoid shaped conductor — Two permanent flat straight magnets — Flat block of soft iron — Magnetic filings

Composition: Adjustable frame, pipe, head with roller and electromagnet, two weights, cord, 10 overloads, 1 m ruler, electronic stopwatch for Atwood. The installation allows you to determine the acceleration of gravity and check Newton’s Second Law.

Experimental study of the addition of electrical vibrations using an harmonigograph. The delivery set includes a 2-channel digital oscilloscope.

The desktop installation is designed to study the principle of flow meters based on the Pitot and Venturi effects. The installation is a vessel with water, the liquid from which flows through Venturi flow meters and a pitot tube.

Designed for demonstrations and laboratory work in the course “Physics”, section “Electricity and Magnetism”. A pair of large diameter coils forming a Helmholtz system, which is used to create a uniform magnetic field. The coils can be connected in parallel or in series. Can be used in the following experiments: — the effect of a […]

The desktop installation is designed to study thermodynamic dependencies when mixing gases; it consists of an air tank, a vacuum pump, a pressure gauge, an exposure meter, and a parameter recording unit.

Study of damped electrical oscillations, measurement of the characteristics of an alternating circuit: period of oscillation, logarithmic damping decrement, critical resistance of the circuit. The delivery set includes signal sources and a 2-channel digital oscilloscope.

Designed to study the propagation of longitudinal sound waves in air and solids. The installation allows you to determine the speed of propagation of a sound wave in air and solids. Compound: -Waveguide with acoustic vibration exciter, microphone with amplifier, scale for measuring wavelength; — Resonator with exciter and mechanical vibration sensor in the rod, […]

Designed to generate high DC voltage and conduct demonstration experiments in the field of electrostatics It can be used as a source of opposite electrostatic charges, as well as a voltage source when demonstrating the phenomenon of electrostatic induction and as a converter of mechanical energy into electrical energy.

Designed to study the propagation of longitudinal sound waves in air. The installation allows you to determine the speed of propagation of a sound wave in air. Compound: -A waveguide with an exciter of acoustic vibrations, a microphone with an amplifier, a scale for measuring wavelength. -Generator with frequency indicator and adjustable output from 1 […]

The desktop installation is designed to measure the thermal conductivity of air using the heated filament method, and consists of a unit for measuring electrical parameters, a heated filament, a tube with air, and methodological recommendations for laboratory work.