02.02. ICE laboratory benches
Продукция
02.02. ICE laboratory benches
-
Подробнее02.02.01.01 Educational and laboratory stand “Gas dynamics” (for internal combustion engines) GO-ICE>
-
Подробнее02.02.03.01 LS “VAZ engine cooling system”>
-
Подробнее02.02.04.01 Laboratory stand “Diagnostics and adjustment of fuel injection pump”>
-
Подробнее02.02.05.01 Current carburetor internal combustion engine VAZ 2106>
-
Подробнее02.02.01.02 Automated laboratory stand “Working processes of gasoline internal combustion engines with an electronic loading device”>
-
Подробнее02.02.04.02 LS “Diagnostics of diesel fuel injectors and plunger pairs”>
-
Подробнее02.02.05.02 Current injection internal combustion engine VAZ-21067>
-
Подробнее02.02.01.03 Automated laboratory stand “Working processes of diesel internal combustion engines with an electronic loading device”>
-
Подробнее02.02.04.04 Diagnostic complex “Motor tester”>
-
Подробнее02.02.05.03 Operating internal combustion engine injection VAZ 21067 with LPG>
-
Подробнее02.02.04.05 Diagnostic complex “Electronic systems of trucks, buses, construction and agricultural equipment”>
-
Подробнее02.02.05.04 Current injection internal combustion engine VAZ (8 class)>
-
Подробнее02.02.02.02 LS “Diesel engine control system COMMON RAIL”>
-
Подробнее02.02.04.06 Diagnostic complex “Diesel engine tester”>
-
Подробнее02.02.05.05 Operating injection internal combustion engine VAZ-2115 with LPG>
-
Подробнее02.02.02.03 Laboratory stand “Multiplex electronic CAN petrol engine control system”>
-
Подробнее02.02.05.06 Current injection internal combustion engine VAZ (16 class DONS)>
-
Подробнее02.02.02.04 LS “Diagnostics of the battery fuel supply system of the KAMAZ engine>
-
Подробнее02.02.05.08 Operating ZMZ injection engine>
-
Подробнее02.02.05.09 Operating ZIL engine>
02.02.01.01 Educational and laboratory stand “Gas dynamics” (for internal combustion engines) GO-ICE
Description The laboratory stand is a simulation complex of typical elements (channels) of the air supply system and exhaust gas removal system of an internal combustion engine, mounted on a rigid base. The complex is equipped with a system of digital and analog sensors that allow measuring its main characteristics Compound: • a powder-coated steel […]
02.02.03.01 LS “VAZ engine cooling system”
Description The laboratory stand is a motorless cooling system module on a mobile base with an instrumentation system and a control module. Provides work to study the design, operating principles and testing of the cooling system of internal combustion engines (ICE) in the training courses: “Car and Tractor Engines”, “Design Analysis and Calculation of ICE”, […]
02.02.04.01 Laboratory stand “Diagnostics and adjustment of fuel injection pump”
Description The laboratory stand is designed for diagnostics, testing and adjustment of high-pressure fuel pumps of various types of domestic and foreign production. Diagnostics is carried out by reproducing the rotational speed of the drive shaft of the high-pressure fuel pump (HPF), temperature and pressure of the fuel, measuring the specified parameters, as well as […]
02.02.05.01 Current carburetor internal combustion engine VAZ 2106
Purpose. The stand should provide the opportunity to perform a wide range of practical work to study the design and working process of a carburetor internal combustion engine of a passenger car, the location and methods of attaching attachments and the interaction of mechanisms and components of a passenger car engine, as well as contribute […]
Laboratory stand “Control system of the VAZ1118 injection engine” SUID-1118
The laboratory stand is designed to carry out a set of practical work on studying the electronic control system of an injection engine, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car as part of the course “Design, repair and operation […]
02.02.01.02 Automated laboratory stand “Working processes of gasoline internal combustion engines with an electronic loading device”
Purpose: The automated laboratory stand “Working processes of gasoline internal combustion engines with an electronic loading device” is intended for carrying out a set of theoretical, practical and laboratory work to study the design, operating principles and testing of internal combustion engines (ICE) in the training courses: “Car and tractor engines «, «Design analysis and […]
02.02.04.02 LS “Diagnostics of diesel fuel injectors and plunger pairs”
The laboratory stand is designed to carry out a set of theoretical, practical and laboratory work to study the design and principle of operation of fuel injectors and plunger pairs, the sequence of the process of diagnosing, servicing, assembling and disassembling, as well as developing initial skills in diagnosing, maintaining and repairing power supply system […]
02.02.05.02 Current injection internal combustion engine VAZ-21067
The training stand is made in the form of a mobile floor-mounted steel frame structure, consisting of an internal combustion engine (ICE) module with an electronically controlled distributed gasoline injection system and a control system. The training stand consists of: an engine with attachments, a control unit with an ignition switch and electrical equipment, a […]
Laboratory stand “Control system of the LADA XRAY injection engine” SUID-XRAY
The laboratory stand is designed to carry out a set of practical work on the study of the electronic control system of a modern injection 4-cylinder engine of domestic production, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car within the […]
02.02.01.03 Automated laboratory stand “Working processes of diesel internal combustion engines with an electronic loading device”
Purpose: The automated laboratory stand is intended for conducting laboratory and educational work on the entire range of disciplines studying diesel internal combustion engines. The laboratory bench consists of a laboratory bench installation and a computer complex for data acquisition and engine control.
02.02.04.04 Diagnostic complex “Motor tester”
Description The complex is a laptop (screen diagonal of at least 15 inches) with pre-installed specialized software, an adapter and a switching kit. All elements are placed on a specialized mobile metal stand. The adapter is used to communicate with the car and connects directly to the analyzed systems in motor tester mode or to […]
02.02.05.03 Operating internal combustion engine injection VAZ 21067 with LPG
The training stand is made in the form of a mobile floor-mounted steel frame structure, consisting of an internal combustion engine (ICE) module with an electronically controlled distributed gasoline injection system and a control system. The training stand consists of: an engine with attachments, a control unit with an ignition switch and electrical equipment, a […]
Laboratory stand “Renault Logan injection engine control system” SUID-Logan
The laboratory stand is intended for carrying out a set of practical work on studying the electronic control system of a foreign-made injection 4-cylinder engine, the principles of its operation and operating modes, as well as developing initial skills in diagnosing, maintaining and repairing a car within the framework of the course “Design, repair and […]
02.02.04.05 Diagnostic complex “Electronic systems of trucks, buses, construction and agricultural equipment”
Description The complex is a laptop (screen diagonal of at least 15 inches) with pre-installed specialized software, an interface module and a switching kit, thus forming a diagnostic multi-brand scanner for trucks, trailers and semi-trailers, commercial light trucks and special equipment. The interface module is connected to a personal computer with a cable via a […]
02.02.05.04 Current injection internal combustion engine VAZ (8 class)
Purpose. The stand should provide the opportunity to perform a wide range of practical work to study the design and working process of a fuel-injected internal combustion engine of a passenger car, the location and methods of attaching attachments and the interaction of mechanisms and components of a passenger car engine, as well as contribute […]
Automated laboratory stand “Working processes of VAZ gasoline internal combustion engines (injector)”
Composition: Four-cylinder VAZ engine with fuel tank and attachments; stand control panel; hydraulic type loading device; mobile frame; cooled sensor of dynamic pressure of the working fluid in the engine cylinder; vacuum sensor in the intake manifold; exhaust gas pressure sensor in the exhaust pipe; lubricating oil temperature sensor; exhaust gas temperature sensor; fresh charge […]
Laboratory stand “Control system of the TOYOTA V8 injection engine” SUID-V8
The laboratory stand is intended for carrying out a set of practical work on studying the electronic control system of an 8-cylinder injection gasoline engine of foreign production, the principles of its operation and operating modes, as well as developing initial skills in diagnosing, maintaining and repairing a car within the framework of the course […]
02.02.02.02 LS “Diesel engine control system COMMON RAIL”
Purpose. The laboratory stand should be designed for practical work on the study of the multiplexer electronic CAN control system for the injection engine of a passenger car, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car.
02.02.04.06 Diagnostic complex “Diesel engine tester”
Designed for teaching methods for checking the technical condition and troubleshooting in automobile diesel internal combustion engines when carrying out maintenance and repair of vehicles at service stations and car service centers. The complex includes a full-featured diesel tester for diesel internal combustion engines, a computer scanner (access codes for working in scanner mode are […]
02.02.05.05 Operating injection internal combustion engine VAZ-2115 with LPG
Ingredients: current VAZ fuel-injection internal combustion engine with LPG, interactive software and information complex for the course “Car Electrical Equipment”, passport, methodological instructions. The required list of faults artificially introduced from the stand control unit: — Low signal level of the mass air flow sensor; — High signal level of the throttle position sensor; — […]
Automated laboratory stand “Working processes of gasoline single-cylinder internal combustion engines” RP-BZh-ICE
Composition: Single-cylinder engine with fuel tank and attachments; stand control panel; hydraulic type loading device; mobile frame; cooled sensor of dynamic pressure of the working fluid in the engine cylinder; vacuum sensor in the intake manifold; exhaust gas pressure sensor in the exhaust pipe; lubricating oil temperature sensor; exhaust gas temperature sensor; fresh charge temperature […]
02.02.02.03 Laboratory stand “Multiplex electronic CAN petrol engine control system”
Purpose. The laboratory stand should be designed for practical work on studying the multiplex control system of a passenger car injection engine, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car. General requirements. 1. The laboratory stand must be a working […]
02.02.05.06 Current injection internal combustion engine VAZ (16 class DONS)
Purpose. The laboratory stand should provide the opportunity to perform a wide range of practical work to study the design and working process of a fuel-injected internal combustion engine of a passenger car, the location and methods of fastening attachments and the interaction of mechanisms and components of a passenger car engine, as well as […]
Automated laboratory stand “Working processes of diesel single-cylinder internal combustion engines” RP-D-ICE
Composition: Single-cylinder diesel engine with fuel tank and attachments; stand control panel; hydraulic type loading device; mobile frame; cooled sensor of dynamic pressure of the working fluid in the engine cylinder; vacuum sensor in the intake manifold; exhaust gas pressure sensor in the exhaust pipe; lubricating oil temperature sensor; exhaust gas temperature sensor; fresh charge […]
02.02.02.04 LS “Diagnostics of the battery fuel supply system of the KAMAZ engine
1. The stand must be a working model of the main electronic systems that control KAMAZ diesel engines with direct fuel injection. 2. The design of the Stand is computer-based. 3. The stand must include a frame with a front panel built into it, a personal computer with pre-installed specialized software, a controller module for […]
02.02.05.08 Operating ZMZ injection engine
The stand must be made in the form of a floor-mounted steel frame structure, coated with protective powder enamel and equipped with industrial swivel wheels. The laboratory stand must be built using the standard component base (piston injection engine, attachments, electrical equipment and elements of external systems) of commercially produced piston internal combustion engines of […]
02.02.05.09 Operating ZIL engine
The laboratory stand is a fully functional working ZIL engine, mounted on a special frame and equipped with everything necessary for maintenance and diagnostics of the engine in all modes without load Compound • mobile frame with protective grilles • operating engine with attachments • panel of instrument cluster and control of internal combustion engine […]
