Ship design
Продукция
Ship design
-
ПодробнееВиртуальный лабораторный стенд «Судовые распределительные устройства и кабельные сети»>
-
ПодробнееИнтерактивный учебный класс «Лаборатория судостроения»>
Training laboratory «Hull design and prototyping»
This laboratory contains a virtual software complex for studying the coefficients of completeness of ship contours and a hardware complex for 3D printing. The software included in the laboratory, using three-dimensional graphics, allows you to moderate ship hulls with different coefficients of completeness and also vary these coefficients with subsequent assessment of their impact on […]
Virtual stand “Vessel hull design and structure”
The stand can be made in the form of a physical laboratory installation, or an interactive virtual stand that contains a description and three-dimensional models of structures and parts of the ship’s hull and ship devices. The stand contains the following sections: • Study of the composition and nomenclature of ship hull parts using three-dimensional […]
Virtual training complex “Virtual container ship”
The multifunctional educational VR complex «Virtual Container Ship» is intended for use as an educational and methodological aid for training cadets of educational institutions of water transport in the section «Vessel Design» of the discipline «Theory and Design of Vessels». This virtual training complex is designed for a detailed study of the design and general […]
Virtual training complex “Virtual tanker ship”
The multifunctional multimedia educational VR complex «Virtual vessel — tanker» is intended for use as an educational and methodological aid in training students of educational institutions of water transport in the section «Vessel structure» of the discipline «Theory and structure of a vessel.» This virtual training complex is designed for a detailed study of the […]
Virtual training complex “Virtual dry cargo ship”
The multifunctional educational VR complex «Virtual dry cargo ship» is intended for use as an educational and methodological aid for training cadets of educational institutions of water transport. This virtual training complex is intended for a detailed study of the design and general structure of modern bulk carriers using virtual reality. This software is a […]
Laboratory complex «Ship stability»
Allows you to carry out laboratory work to determine the stability of the vessel. Using a small-sized pool and scale models and a laboratory installation, modeling and visualization of various parameters and conditions that determine the stability of the vessel are carried out and experiments are carried out to measure them. The stand allows you […]
Training complex “Installation of logs”
The training complex is designed to study the design of various types of ship logs. The training complex contains a swimming pool filled with water and a moving platform-carriage attached to it. Various types of logs and recording sensors are installed on the carriage, which makes it possible to test the logs and clearly demonstrate […]
Training stand “Propulsion steam turbine power plant”
The stand is a miniature model of a steam generating plant. Designed to study the design and basic functional diagram. A hand pump supplies water from the supply reservoir to a small gas boiler, where the steam is further heated by an additional superheater. Steam is supplied to a single-stage turbine through a nozzle. The […]
Training complex “Design, prototyping and testing of ship propulsion systems”
This hardware and software complex-laboratory is designed to carry out educational, research and scientific research work on semi-natural modeling and prototyping of various types of ship propulsion systems. This laboratory contains a virtual software complex for studying the geometric characteristics of propellers and their simplified design, as well as a 3D printing hardware complex and […]
Vibration test bench for ships
The ship vibration test bench is designed to study resonance phenomena using a simple model of a ship’s hull as an example. Allows you to measure the frequency of the ship’s hull’s own vibration and compare it with table values, to study the main phenomena associated with the resonant vibration of the ship. The model […]
Training stand “Operation principle and design of ballast tanks”
The stand is designed to study the structure and principles of operation of ballast tanks installed on underwater vessels, using miniature models as an example. The stand is a small-sized pool in which ballast mechanisms are tested on models of submersion-ascent systems for underwater vessels. The dive-ascent model consists of several sealed tanks with controlled […]
Виртуальный лабораторный стенд «Судовые распределительные устройства и кабельные сети»
Виртуальный лабораторный стенд «Судовые распределительные устройства и кабельные сети» — это программное обеспечение для учащихся судостроительной отрасли по направлениям «Судостроение» и «Судовые электрические сети», содержащее в себе интерактивные трёхмерные модели. Комплекс предоставляет возможность студентам исследовать принципы организации распределения электроэнергии по кабельным сетям судна через распределительные устройства до потребителей. Интерактивные учебные стенды позволяют пройти учебную программу […]
Интерактивный учебный класс «Лаборатория судостроения»
Оснащение учебного класса «Лаборатория судостроения» современным оборудованием помогает студентам и преподавателям эффективно погружаться в обучение посредством взаимодействия с тренажерами, стендами, наглядными моделями и компьютерными программами. Детальные копии реальных объектов позволяют учащимся подробно исследовать устройство и конструкцию судов. Трёхмерные модели воспроизводят процессы, идентичные реальным. Интерактивные учебные тренажеры и стенды позволяют пройти учебную программу с большим интересом […]
