The educational laboratory complex is made on the basis of a hydraulic desktop press with numerical control and is intended for studying the basic principles and processes of metal forming. The use of the complex provides knowledge and skills in the field of volumetric pressing, sheet stamping, measuring tools, hydraulic drives, etc. Pre-installed software allows […]

A set of equipment for demonstrating didactic material in classrooms for up to 35 people. Contents: projector, screen (150×150 cm), laptop, teaching software for courses: — technology of construction materials; — Foundry; — steel metallurgy and production of ferroalloys; — metallurgical technologies; — tolerances and technical measurements; — technical measurements. Metrology, standardization and certification; — […]

List of works:

Visual three-dimensional models of equipment, main components and elements for studying the features of the device. — Step-by-step visualization of the technological process to study the operating principle. — Knowledge control in the form of testing. — Reference material.

Educational and training software package for studying the design of a pipe rolling unit, its individual sections and elements. Allows you to practice maintenance (assembly, disassembly, replacement) of individual equipment elements. Training and testing modes have been implemented. Includes: Specialized software and a set of manuals. (PC and VR system are not included)

A specialized software package designed for equipment research, training and testing of knowledge in the specialty of Slinger. Allows you to interact with virtual copies of equipment and tools using virtual reality systems, performing operational scenarios for slinging products. Includes: Custom software and manual kit, PC and VR system

Processes of casting, forging, turning, milling, grinding, gear hobbing, gear shaping, gear planing. List of videos: 1. Receiving blanks: (10 min 36 s) rolling of slabs and sheets; metal casting in sand molds; stamping on a horizontal forging machine (GKM); open die stamping; 2. Mechanical gears»: (1 min 38 s) spur gear; worm gears with […]

The virtual simulator-emulator is a combination of a virtual press with a hydraulic drive and software control, a graphic station with installed software. A set of virtual interchangeable dies allows you to carry out 9 laboratory works describing the most common OMD operations: – draft; – disembarkation; – pressing; – reverse extrusion; – combined extrusion; […]

The virtual simulator is available in three versions:

The software implements the following teaching methods: — Visual three-dimensional models of equipment, main components and elements for studying the features of the device. — Step-by-step visualization of the technological process to study the operating principle. — Knowledge control in the form of testing. — Reference material.

Educational and training software package for developing skills in operating equipment for a workpiece loading line in a virtual reality environment. The simulator allows you to practice normal and emergency situations. Training and testing modes have been implemented. Includes: Specialized software and a set of manuals. (PC and VR system are not included)

A specialized software package designed for equipment research, training and testing of knowledge in the specialty of a repairman. Allows you to interact with virtual copies of equipment and tools using virtual reality systems, performing operational scenarios for cage repair. Includes: Dedicated software and manual kit, PC and VR system

An automated laboratory single-shot drawing machine is intended for carrying out laboratory work in the courses “Theory and technology of metal forming”, “Technology” rolling production”, etc., as well as for carrying out research work. The kit includes: drawing machine VS-350/1, sharpening machine, set of dies, measuring tools, lubricant, workpiece, operating instructions, guidelines for laboratory work: […]

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.

The complex is designed to teach safe techniques for working with instrumentation and test materials when conducting virtual laboratory work. The complex is an effective tool that helps to carry out training, verification and testing of acquired knowledge. The complex is safe and reliable in operation and does not require special maintenance. Includes: specialized software […]

Visual three-dimensional models of equipment, main components and elements for studying the features of the device. — Step-by-step visualization of the technological process to study the operating principle. — Knowledge control in the form of testing. — Reference material

A specialized software package designed for equipment research, training and testing of knowledge in the specialty Electrician. Allows you to interact with virtual copies of equipment and tools using virtual reality systems, performing operational scenarios for electric motor repair. Includes: Specialized software and manual kit, PC and VR system

Educational and training software package for developing skills in operating walking beam furnace equipment in a virtual reality environment. The simulator allows you to practice normal and emergency situations. Training and testing modes have been implemented. Includes: Specialized software and a set of manuals. (PC and VR system are not included)

Automated laboratory triple drawing machine is designed for laboratory work on courses “Theory and technology of metal forming”, “Technology rolling production”, etc., as well as for carrying out research work. Compound: Drawing machine VS-350/3 – 1 piece PU control panel – 1 piece Returning figurine OF – 1 pc. OS sharpening machine – 1 pc. […]

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.

Visual three-dimensional models of equipment, main components and elements for studying the features of the device. — Step-by-step visualization of the technological process to study the operating principle. — Knowledge control in the form of testing. — Reference material.

The complex is designed to study the processes of setting up and adjusting elements of mold production equipment, as well as process control and condition monitoring during their operation. Demonstrates the influence of the product manufacturing process on the quality of the finished product. The structure includes a computer with pre-installed specialized software that allows […]

Educational and training software package for developing skills in operating equipment for a workpiece cutting line in a virtual reality environment. The simulator allows you to practice normal and emergency situations. Training and testing modes have been implemented. Includes: Specialized software and a set of manuals. (PC and VR system are not included)

A specialized software package designed for equipment research, training and testing of knowledge on labor protection in the workplace. Allows, using virtual reality systems, to interact with virtual copies of equipment and tools, performing operational scenarios for optimizing and checking the workplace. Includes: Specialized software and manual kit, PC and VR system

The automated laboratory rolling mill DUO-130 is intended for carrying out laboratory work in the courses “Theory and technology of metal forming”, “Rolling production technology”, etc., as well as for carrying out research work. Kit includes: 1. Rolling mill DUO 130, including a rolling stand, control panel based on a programmable logic controller 2. Vernier […]

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.

Specialized software that implements the corresponding three-dimensional models of equipment. Includes: specialized software and a set of manuals.