A set of equipment for demonstrating didactic material in classrooms for up to 35 people. Contents: projector, screen (150×150 cm), laptop, teaching software for courses: — electrical equipment of the car; — car device; — vehicle device (VPO); — car maintenance (2 parts); — tractors; — agricultural machines (abbreviated); — road construction machines.

The laboratory module should be designed to carry out a set of practical work to study the characteristics of the electric parking brake system, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a vehicle as part of the course “Design, repair and […]

The laboratory stand is designed to carry out a set of practical work on studying the electronic control system of an injection engine, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car as part of the course “Design, repair and operation […]

A set of products for cleaning and testing spark spark plugs is intended for maintenance before diagnosing and diagnosing during operation of spark plugs of internal combustion engines with a thread on the body M14x1.25 and a thread length of the part from 12 to 19 mm. The set consists of two devices: — a […]

The virtual simulator contains 8 virtual stands — Virtual stand “Vehicle safety and traffic control system”; — Virtual stand “Electronic engine and transmission control systems for passenger cars”; — Virtual stand “Starter system for passenger cars”; — Virtual stand “Lighting, light and sound alarm systems for passenger cars”; — Virtual stand “Energy supply system for […]

This device allows you to evaluate the quality of the brake fluid (moisture content level) and determine the moment necessary to replace it. The probe that the tester is equipped with is flexible, which allows testing in hard-to-reach places. Has light and sound alarm.

The laboratory module should be designed to carry out a set of practical work to study the characteristics of the electric drive system of car mirrors, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car as part of the course “Design, […]

The laboratory stand is designed to carry out a set of practical work on the study of the electronic control system of a modern injection 4-cylinder engine of domestic production, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car within the […]

The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.

The virtual stand is designed to study automotive parts of the air suspension system of a passenger car, such as a ride height sensor, a receiver, a pressure sensor in the receiver, a compressor, an electric valve block, a ride height adjustment washer, a shock absorber stiffness regulator, an air strut with a balloon and […]

A multi-brand computer scanner program is designed for diagnosing various systems of domestic and imported passenger cars (engine, ABS, airbags, etc.) through the diagnostic interface of electronic control units (ECUs) of the type: ALDL, K, L-Line (ISO 9141-2 , ISO 14230-4, KWP-2000, KWP-1281, KW-81, KW-82), J1850 PWM, J1850 VPW, CAN (ISO 11898-2 HICAN, ISO 11898-3 […]

The laboratory module should be designed to carry out a set of practical work to study the characteristics of a tire pressure sensor installed on a wheel rim, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car as part of the […]

The laboratory stand is intended for carrying out a set of practical work on studying the electronic control system of a foreign-made injection 4-cylinder engine, the principles of its operation and operating modes, as well as developing initial skills in diagnosing, maintaining and repairing a car within the framework of the course “Design, repair and […]

The image is printed on a plastic base with a thickness of 4 mm and a size of 841×1189 mm. The image is waterproof. Each poster has elements for attaching to the wall.

The virtual laboratory complex contains 8 virtual stands — Virtual stand “Truck safety and traffic control system”; — Virtual stand “Electronic engine and transmission control systems of a truck”; — Virtual stand “Truck Starter System”; — Virtual stand “Lighting, light and sound alarm systems for trucks”; — Virtual stand “Truck power supply system”; — Virtual […]

Rated voltage: ~220–240 V, 50-60 Hz — Charge voltage: 14.4 — 14.7 V (17.0 V — Desulfation) — Minimum remaining battery charge: 2 V — Maximum charging current: 25A or 12.5A — Temperature range for charging: from 0ºС to +45ºС — Temperature range for diagnostics: from -20ºС to +45ºС — Cooling: natural convection — Charger […]

Visual aids in electronic form on CD are intended for demonstration by a teacher using a projector. Graphic modules – 105. Sections: 1. Fundamentals of automobile design; 2. Structure of the VAZ-2108 car.

The laboratory module must be designed to carry out the complex practical work on the study of coolant temperature sensors modern car, the principles of their functioning and operating modes, as well as formation of initial skills in diagnostics, technical vehicle maintenance and repair within the framework of the course “Design, repair and operation motor […]

The laboratory stand is intended for carrying out a set of practical work on studying the electronic control system of an 8-cylinder injection gasoline engine of foreign production, the principles of its operation and operating modes, as well as developing initial skills in diagnosing, maintaining and repairing a car within the framework of the course […]

Set contents: Extractors — 23 pcs; Case. Parameters of packaged goods Product unit: Piece Weight, kg: 1.51 Length, mm: 210 Width, mm: 155 Height, mm: 50 Advantages The extractors included in the 23-piece wiring terminal removal kit are used to unlock contact locks in electrical connectors; The set can be used in a car service […]

Visual aids in electronic form on CD are intended for demonstration by a teacher using a projector. Graphic modules – 147. Sections: 1. Construction of trucks; 2. Construction of passenger cars.

The laboratory module must be designed to carry out the complex practical work on studying the characteristics of the idle speed controller of injection power supply and control systems for the internal combustion engine of a modern car, its principles functioning and operating modes, as well as the formation of initial skills on diagnostics, maintenance […]

The stand provides the ability to carry out direct electrical measurements in the circuits of the systems under study, as well as to enter faults with their subsequent diagnostics and parameter adjustment using diagnostic equipment of the automobile engine systems under study. The stand provides clarity when studying the functioning of the control system of […]

Visual aids in electronic form on CD are intended for demonstration by a teacher using a projector. There are 262 graphic modules, 65 themes. Sections: 1. Planned and preventive system; 2. Branded service systems; 3. Elements of the technological process; 4. Cleaning and washing work; 5. Polishing of bodies; 6. Fastening works; 7. Lubrication and […]

The laboratory module should be designed to carry out a set of practical work to study the characteristics of the mass air flow sensor of a modern car, the principles of its operation and operating modes, as well as the formation of initial skills in diagnosing, maintaining and repairing a car as part of the […]

The body is assembled from an aluminum profile specially designed for educational laboratory installations and is mounted on a furniture support (wheeled). The profile has a box-shaped section, which gives it unprecedented lightness and rigidity when deformed by torsion and bending. The stand is a panel showing a block diagram of the FSI injection system, […]

The stand-tablet is designed for studying the available standard connectors of automotive electrical systems of modern cars, is used for training students of technical schools, universities and specialized training centers, is made on a base made of laminated chipboard measuring 400 * 600 mm, contains a front panel made of anodized aluminum on which connector […]