Construction materials, machines and technologies. Architecture
Продукция
Construction materials, machines and technologies. Architecture
-
Подробнее09.10.01.01 Virtual training complex “Road construction simulator”>
Demonstration complex “Building materials, machines and technologies”
A set of equipment for demonstrating didactic material in classrooms for up to 35 people. Contents: projector, screen (150×150 cm), laptop, teaching software for courses: — geodesy; — building construction; — Construction Materials; — construction machines; — road construction machines; — sling work; — construction production technology (SPO); — technology of construction processes (vpo); — […]
Demonstration set “Nails, wall pins and anchors”
The set allows you to study the main types of mortars used in construction, their production technologies, the materials used, and areas of application. The samples included in the composition can be used as comparative standards when carrying out laboratory work. The set includes wide-mouth jars with basic materials: sand, clay, gypsum, slaked lime, cement, […]
Educational and laboratory complex “Technology and organization of highway construction”
The complex is designed to train students in various construction specialties. Allows you to visually study the technology and rules of work when constructing asphalt concrete pavements of highways: • Road construction manufacturing enterprises • Road construction machines and mechanisms • Construction of subgrade • Preparation of the road surface and construction of foundations • […]
Educational training complex “Virtual simulator of a woodworking machine”
The complex will allow training of specialists in carpentry or processing of wooden blanks on various types of woodworking machines. Using an immersion virtual reality system, the complex allows you to simulate work on various types of machines using a real wooden workpiece with a positioning sensor to interact with the virtual environment. Using this […]
Laboratory complex “Control of pumping station” SU-UNPS-01
The laboratory complex is designed to conduct laboratory work in specialties related to the operation of pumping equipment, pipelines and automation systems of pumping stations. The complex consists of four control and monitoring systems: 2 pumping station control systems, a consumption monitoring system and a control system. Each system contains a programmable logic controller. The […]
Laboratory stand “Determination of the strain sensitivity coefficient of a strain gauge”
The stand allows you to experimentally determine the strain sensitivity coefficient of a wire strain gauge by two methods, evaluate the error of each method for determining strain sensitivity, and compare the accuracy of the methods. Dimensions and weight of the complex (gross): • Maximum LxWxH (mm): 2000x1200x1800 • Weight, kg: no more than 250
Model of a concrete plant
The model is a demonstration complex for museums, schools, universities and technical colleges. A small copy of a concrete production plant has been assembled on the interactive table; it is possible to study the internal elements of mixers, water tanks and cement containers and feed sand impurities into the main mixer using a belt conveyor. […]
Simulator simulator Motor grader GS-14.02
The training and educational complex “Motor grader simulator” is intended for institutions that train personnel to work on special equipment, as well as for institutions of general and secondary vocational education and training centers of enterprises. The complex is designed to teach safe work techniques when performing mechanized work using a motor grader in the […]
Stand-simulator “Technology for laying cable lines in housing and communal services”
The frame-style stand is a booth with 3 walls, a floor and a ceiling, designed to familiarize yourself with various types of laying electrical cables used in housing and communal services, allowing you to practice skills in laying cables and disconnecting junction boxes and basic electrical installation products. Has the ability to check for correct […]
Standard set of educational equipment “Automation and control tools”, monoblock version with laptop, SAU-MINI-MN
Dimensions (without laptop) 650x225x120 mm Weight, no more than 15 kg Compound: 1. Monoblock containing: programmable logic controller; touch monitor. 2. Laboratory module of technological information sensors. 3. Set of contactless limit switches. 4. Laptop. 5. Set of power cables and connecting wires. 6. Software (CD). 7. Technical description of the laboratory stand. 8. Methodological […]
Standard set of training equipment “Ventilation systems” VENT-017-13LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]
Training complex “Screw mortar pump”
The complex allows you to visually study the principle of operation of the mortar pump, become familiar with the main mechanisms and operating conditions: — supply of solution to the loading device — determination of mixture pumping volumes depending on the screw rotation speed and helix pitch — cleaning the auger and the construction mixture […]
Typical set of educational equipment “Wastewater treatment”
The complex is designed to study the wastewater treatment process and its main elements. The ability to take a water sample after each stage of purification has been implemented, which helps to control the quality of purified water as it passes through the settling tank and filters. Allows you to study the disinfecting effects of […]
Virtual educational complex “Design and principle of operation, as well as methods of operation of geodetic instruments”
This virtual complex allows you, using three-dimensional graphics and animation, as well as interactive reference material, to become familiar with the main types of geodetic instruments, as well as study their structure, design, and operating principles. The software provides three-dimensional analogues of the following devices. • levels; • theodolites; • tacheometers; • rangefinders
Virtual training complex “Virtual prototyping — CFD data visualization”
Specialized software allows for multivariate modeling and visualization of CFD calculation data for construction and architectural objects. Allows you to interact interactively with the necessary equipment in a virtual reality system. Allows you to conduct and evaluate a virtual work scenario. Includes: Specialized software and manual
09.10.01.01 Virtual training complex “Road construction simulator”
The complex is designed to study the processes of highway construction, as well as control processes and monitor the status of work. The program contains graphical information and control panels. The program implements an animated 3D model-simulator of highway construction, which includes the following elements: 1. Design section 2. Machines and devices 3. Road surface […]
Demonstration set “Types and groups of mortars”
Wide-mouth jars with basic materials: sand, clay, gypsum, slaked lime, cement, liquid glass. Various types of mortars of hardened samples: masonry cement-sand mortar, liquid glass mortar, gypsum mortar, cement-sand mortar, lime-cement mortar, clay-gypsum mortar, clay mortar, lime-gypsum mortar. The set is packed in an aluminum case, dimensions: 500x350x170 mm Weight, kg: no more than 20
Educational complex “Technology of reinforcement works”
The desktop-type training stand is designed for training students of various construction specialties. Allows you to visually study the types and elements of reinforcement, methods and principles of installing reinforcement when pouring concrete, devices and clamps to provide a protective layer of concrete. Compound: — Samples of reinforcing steel of various diameters — Reinforcing elements […]
Laboratory stand “Determination of the sensitivity of a bridge circuit for switching on strain gauges”
The stand allows you to master methods for determining the sensitivity of measuring circuits composed of strain gauges, study the effect of the type of symmetry of the bridge circuit on the sensitivity of bridge circuits, as well as the influence of the number of active strain gauges on the sensitivity of the bridge circuit. […]
Layout of an asphalt concrete plant
The model is a demonstration complex for museums, schools, universities and technical colleges. A small copy of an asphalt concrete production plant has been assembled on an interactive table, and the ability to study internal elements has been implemented. The interactive table is equipped with an LCD touch screen, allows you to display animated connections […]
Pipelayer simulator (TP20)
The simulator is designed to teach safe operating techniques and control to the operator of a modern pipe layer, and to study the design of the machine. Training conditions that correspond to real working conditions are achieved through the creation of a realistic three-dimensional virtual scene of the working site and the interior of the […]
Set of tablets “Geodesy” 560×800 mm, 16 pcs
The image is printed on a plastic base 4 mm thick and 560×800 mm in size. The image is waterproof. Each poster has elements for attaching to the wall.
Stand-simulator “Individual electricity metering and distribution panel”
The training stand is a frame structure on which a standard individual power distribution panel, indicators, and sockets are mounted. It allows you to practice the skills of assembling various circuits, master the skill of reading electrical circuits, and check the correctness of the assembly. Dimensions and weight of the complex (gross): — maximum LxWxH […]
Standard set of educational equipment “Water desalting by reverse osmosis”
The complex is designed to study the processes of deep water purification — desalination of brackish waters, including sea water, in order to obtain drinking water or prepare ultrapure water for the semiconductor, medical and thermal power industries. Compound: — Frame — Raw material tank — Collection tank — Feed pump — Reverse osmosis membrane […]
Standard set of training equipment “Automation of pumping stations of water supply systems” SU-ANSSV-015-17LR-01
The delivery set includes: – educational and research stand; – laboratory table with a retractable panel for a laptop; — laptop; – description of laboratory work; – passport combined with the stand operating manual. The stand allows you to measure the pressure and flow characteristics of pumps and a pumping station based on a combination […]
Standard set of training equipment “Elevator automation and control equipment”, desktop version with laptop, SAU-LIFT-NN
Dimensions 810x550x510 mm Weight, no more than 20 kg Compound: 1. Monoblock PLC. 2. An assembled elevator model, with technological information sensors and a platform. 3. Laptop. 4. Software for PLC. 5. Set of power cables and connecting wires. 6. Technical description of the laboratory stand. 7. Guidelines for conducting laboratory work.
Standard set of training equipment “Ventilation systems” VENT-017-16LR
The stand consists of a polymer-coated metal frame on which the following are mounted: – a fan with a device for regulating fan speed and measuring it; – pipeline system: the pipeline under study is of a circular cross-section with a diameter of 100 mm, a rectangular cross-section with dimensions of 60 x 120 mm, […]
