• desktop design and dimensions no less than 600´300´300 mm; • engine version, with installation in a nacelle under the wing; • physical model of the CFM56-7B engine, made using 3D printing from plastic and metal; • driven by compressed air or electric motor; • the package includes a compressor • a collapsible model in […]

• desktop design and dimensions no less than 600´300´300 mm; • physical model of the TV3-117 turboshaft engine, made using 3D printing from plastic and metal; • driven by compressed air; • the kit includes a compressor to drive the engine • a working three-dimensional collapsible model, interfaced and harmonized with a virtual copy of […]

The operating model of the airport with static-dynamic display of landing strips and taxiways is intended to study the general principles of aircraft movement along the runway and taxiways. The model is made of plastic using 3D printing and milling and painted with acrylic paints. The layout can either be made up of standard blocks […]

This educational complex allows, using a working physical model, to study the operating principle and basic kinematics of a mechanical torque meter. Turboshaft engines use an integrated torque sensing system. This split-type torque meter is a helical gear reducer that uses the axial force generated by the intermediate gear to measure torque. The model is […]

This educational complex allows, using a working physical model, to study the operating principle and basic kinematics of a mechanical torque meter. Turboshaft engines use an integrated torque sensing system. This split-type torque meter is a planetary gearbox that uses the axial force generated by the intermediate gear to measure torque. The model is made […]

The training complex “Model of a turboshaft engine with a tail rotor module” “should provide training for aviation industry specialists in various specialties within the framework of the discipline “Aircraft Engine Design.” This complex is a physical working model of a typical turboshaft engine used on a helicopter made of plastic with the use of […]

The model is intended for methodological support of the educational process on the structural analysis of mechanisms and components of aircraft in laboratory workshops and when giving lectures. Can be used in the study of the disciplines “theoretical mechanics” and “aircraft design” The equipment can be used for training in general educational institutions, institutions of […]

This scale model shows an aircraft wing in two directions from the fuselage with mechanization elements laid out along the trailing edge of the wing on one side and along the leading edge on the other, each element is highlighted in a separate color and makes it easy to identify. This model has a scale […]

The engine is built into a rugged metal frame that holds it securely while allowing the thrust produced by the engine to be accurately measured. The stand supports measurements of many characteristics of flow temperature and air mass flow. The electronic controller constantly monitors engine parameters, ensuring safe operating conditions at all times. The motor […]

The training model allows you to study the principle of operation, structure, purpose and kinematics of the helicopter rotor swashplate with a demonstration of its operation. The equipment can be used for training in general education institutions, primary, secondary and higher vocational education institutions to obtain basic and advanced knowledge and skills in specialties related […]

Production of a physical working model at the customer’s request in the required scale from various materials (plastic, wood, metal) The model may contain mechatronic elements and a built-in lighting system

This educational complex, using a working physical model, is used to study the structure, operation scheme, as well as the basics of kinematics and dynamics of the rotary nozzle of a jet engine used in short take-off and landing fighters. The prototype is a model of a rotary nozzle on three bearings, driven by gearboxes […]

This educational complex, using a working physical model, allows you to study the structure, operation scheme, as well as the basics of kinematics and dynamics of an adjustable jet engine nozzle. The prototype is a working model of an adjustable nozzle, mechanized with the help of bearings, driven by gearboxes and a drive lever. The […]

This educational complex, using a working physical model, allows you to study the structure, operation scheme, as well as the basic kinematics of a bucket-type thrust reverser. The prototype is a working model of a bucket-type thrust reverser, mechanized with the help of bearings, driven by gearboxes and a drive lever. The model has sections […]

This educational complex allows you to study the structure and operating principle of a turbojet engine fuel injector using a working cut-out model. The injector is part of the combustion chamber of a turbojet engine and is designed to provide consistent fuel atomization at both low and high flow rates. There are two types of […]

This educational complex allows you to study the structure, operating principle and kinematics of a turboprop engine using a working physical model. The model includes the following functional and structural elements: • Centrifugal compressor • The combustion chamber • Axial flow turbine • Gearboxes and cardan shaft • Air intake with oil-cooled air duct The […]

This educational complex allows, using a working physical model, to study the structure, operating principle and kinematics of a turboshaft engine with a radial compressor and turbine. The model is made of plastic with metal bearings and bolts for assembly, the scale of the model is negotiated with the customer, but the finished model must […]

The mock-up allows you to study the structure, operating principle and kinematics of the mechanism for changing the propeller pitch. The model includes the following functional and structural elements: • Propeller blades • Piston • Stoppers • Pitch change mechanism • Stand • The model is made of plastic with metal bolts for assembly, the […]

The model allows you to study the design, principle of operation and kinematics of the wing of a modern airliner using the example of the Il-76MD90 military aircraft or civil airliners of the Airbus A320 family. The model includes the following functional and structural elements: • Wing console to scale with moving elements, flaps, slats, […]

The mock-up allows you to study the structure, principle of operation and kinematics of the internal combustion engine of the ROTAX-912 family. The model includes the following functional and structural elements: • Engine crankcase with active piston group • Camshaft and valve block • Gearbox that transmits crankshaft speed to the axis of rotation of […]

Mock-ups allow you to study the structure, operating principle and kinematics of a turbojet engine. The model is made of plastic with metal bearings and bolts for assembly, the scale of the model is negotiated with the customer, but the finished model must have a desktop design and occupy at least 700x600x400 mm. • The […]

The mock-up allows you to study the structure, operating principle and kinematics of a gas turbine engine. The model is made of plastic with metal bearings and bolts for assembly, the scale of the model is negotiated with the customer, but the finished model must have a desktop design and occupy at least 500x300x300 mm […]

The model allows you to study the structure of an axial compressor. The model includes the following functional and structural elements: • Rotating blades • Blades • Rotor disc • Stator • Slipway The model is made of plastic with metal bolts for assembly, the scale of the model is negotiated with the customer, but […]

The model allows you to study the design of the propeller. The model includes the following elements: • Fan blades • Fan disc • Protective spacers • Fan housing The model is made of plastic with metal bolts for assembly, the scale of the model is negotiated with the customer, but the finished model must […]

A model of a complex of aerofinisher devices, made of plastic with transparent windows for visualizing the internal structure and composition of the device. The model includes part of the deck of an aircraft-carrying cruiser, as well as a simulator of an aircraft landing. The model is installed on a sub-model and has a light […]

This educational complex allows, using a working physical model, to study the internal structure of an airplane, helicopter, multi-rotor system, the location of the load-bearing frame, frames, and stringers. The model can be used to implement the mechanization of aircraft rudders, as well as show the location of electrical, fuel, and pneumatic lines. In addition, […]

This model is a plastic structure that realistically reproduces the launch pad of the first stage of the Vostochny cosmodrome. The layout is installed on a sub-model and contains the illumination of the main elements, as well as a backlight control system. The model accurately depicts the main buildings and elements of the launch infrastructure, […]