Description

The complex should include two devices. The first device removes carbon deposits and other contaminants using sandblasting and blowing with compressed air. For cleaning, molding sand with a grain size of 0.14-0.18 mm is used. Connects to the compressed air network. The second device for checking spark plugs. Allows you to test the spark plug for tightness and uninterrupted sparking at a given pressure in the test chamber. The pressure is generated by a hand pump, and sparking is initiated by a built-in high voltage source. For ease of use, the instrument panel contains a table of test pressure values ​​depending on the gap between the spark plug electrodes. The kit includes a combination probe from 0.6 to 1 mm every 0.1 mm and a special key for adjusting the spark gap of the spark plugs.
Requirements for spark plugs: thread on the body M14 x 1.25 / M18 x 1.5; length of the threaded part from 12 to 19 mm; pressure measurement range from 0 to 16 atm.
Technical characteristics of the devices: spark gap of the control gap 12 mm; pneumatic supply (for the first device) from 4 to 6 atm; the duration of cleaning one candle is 10 s; compressed air consumption 100 l/min; power supply of the second device is 220 V. Dimensions and weight of the first device are 215x176x288 mm, weight 4 kg; second device 350x260x105 mm, 7 kg.