Description

The stand-tablet should be a frame structure, on the front panel of which is a schematic electrical diagram of the ZIL lighting system. The design on the front panel must be protected from damage when using the stand using the lamination method.
The tablet stand must include: frame structure (PVC profile with a width of no more than 90 mm; fiberboard with a thickness of no more than 3 mm; PVC film with a full-color image with a resolution of at least 1400 dpi with an image of the electrical circuit of the ZIL lighting system; a set of suspensions; an electronic logic device based on the ADCS-P-5 controller; a LED display complex shows the order of switching and operation of the low-voltage and high-voltage parts of the ignition system.
The electrical circuit of the stand must be powered by a standard switching power supply. The power cord connector and power supply switch must be installed on the side panel of the stand.

Specifications:
Power supply: alternating current frequency 50 Hz, voltage 220 V;
Power consumption no more than 50 W;
Overall dimensions, not less than 841x90x594 mm;
Weight: no more than 5 kg.