Description

Compound:
1. Work stand
1.1. An L-shaped frame with two frame walls with removable panels made of laminated chipboard sheets and a frame for a system of industrial technical raised floors.
1.2. Wall-mounted telecommunications cabinet 19” 12U high.
1.3. Telecommunication rack 19″»»» open type with a height of 42U.
1.4. Wire tray 100×200 mm.
1.5. Cable channel 100×60 mm.
1.6. 50 l rectangular container with a lid for storing and dispensing consumables.
1.7. Block for 8 sockets with the ability to install in a 19″»» rack.
1.8. Metal cable organizer (1U, 5 rings 60x40mm) in quantity 5 pcs.

2. Installation location:
2.1. Assembly table 600x1200x500 mm.
2.2. Chair without armrests 600x1200x500 mm.
2.3. Universal bracket for mounting couplings.
2.4. Mounting clamp for cables.
2.5. The source of additional lighting is portable.
2.6. Folding carpentry workbench 750x620x550 mm.

3. Training and production equipment:
3.1. Apparatus for welding optical fibers (welding fibers with an attenuation of no more than 0.02 dB and the ability to shrink KDZS 40 and 60 mm. Included: apparatus, optical fiber cleaver, power source).
3.2. Optical tester OLTS complete with cords.
3.3. Visual fault locator (output power no less than 5 mW and no more than 30 mW, universal port 2.5 mm (FC, SC, ST), batteries included).
3.4. Cable tester + tone generator for twisted pair cable.
3.5. Cordless drill-driver with a set of bits (torque up to 17 Nm, torque adjustment, battery, charger included, set of bits PH1-2, PZ1-2, SL2-4, HEX6).
3.6. Technical hair dryer.
3.7. Laptop.
3.8. Wi-Fi router.
3.9. Switch for 8 ports.
3.10. IP camera.
3.11. IP phone.
3.12. Subscriber home automation controller.

4. Occupational health and safety:
4.1. Set for cleaning the workplace (brush, dustpan).
4.2. Garbage tank with lid 70 l.
4.3. Containers for collecting and recycling chipped optical fibers.
4.4. Rubber floor mat.
4.5. The brush is soft.

5. Personal protective equipment:
5.1. The apron is rubberized.
5.2. Protective glasses.
5.3. Gloves for working with liquids (3 pairs).
5.4. Gloves for installation work (3 pairs).
6. Toolbox
6.1. Tool trolley.
6.2. Hacksaw for metal with spare blade.
6.3. Cable cutters for steel cable.
6.4. Side cutters (2 pcs.)
6.5. Pliers.
6.6. Small Phillips screwdriver.
6.7. Large Phillips screwdriver.
6.8. Small slotted screwdriver.
6.9. Large slotted screwdriver.
6.10. Roulette.
6.11. External cutting knife cable sheath with spare blade (2 pcs.)
6.12. Stripper for removing the sheaths of copper-core cables.
6.13. Stripper to remove 250 µm of fiber coating and 900 µm buffer.
6.14. Stripper-clothespin for removing modules.
6.15. Kevlar scissors.
6.16. Assembly knife.
6.17. Tweezers.
6.18. Metal ruler.
6.19. Propanol dispenser.
6.20. Set of wrenches.
6.21. Tool for stripping and cutting twisted pair cables.
6.22. Crimper/Crimper.
6.23. Tool for installing wires into IDC contacts.
6.24. Percussion instrument for crosses type 110.
6.25. Crimping pliers for Keystone modules.
6.26. Wood crown 20…30 mm.
6.27. Flashlight with battery.
6.28. Level.
6.29. Container for KDZS.
6.30. Container for lint-free wipes.
6.31. Scissors for cutting paper.
6.32. Calipers.
6.33. 90° angle.
6.34. Tool belt.
6.35. Talc.
6.36. Collapsible bucket.
6.37. Organizer for laying KDZS during the welding process.
6.38. Cable tightening device.
6.39. Timer (2 pcs.)
6.40. Marking labels (1 set)
6.41. Magnets (1 set)
6.42. Device for cleaning ferrules of connectors and adapters LC, SC.