Description

The stand-tablet should be a frame structure, on the front panel of which there is a schematic diagram of the fuel supply system for the KAMAZ engine. The design on the front panel must be protected from damage when using the stand using the lamination method.
The tablet stand must include: frame structure (PVC profile with a width of no more than 90 mm; fiberboard with a thickness of no more than 3 mm; PVC film with a full-color image with a resolution of at least 1400 dpi with an image of the fuel supply system of the KAMAZ engine; a set of suspensions; an electronic logic device based on the ADCS-P-5 controller, which allows you to demonstrate, using controlled LEDs, the order of fuel movement in the forward and reverse circuits of the power system, as well as the principle of fuel flow distribution in KAMAZ engines; two buttons for controlling operating modes).
The electrical circuit of the stand must be powered by a standard switching power supply. The power cord connector and power supply switch must be installed on the side panel of the stand.
Specifications:
power supply: alternating current frequency 50 Hz, voltage 220 V;
power consumption no more than 50 W;
overall dimensions, not less than 841x90x594 mm;
weight, no more than 5 kg.