Description

The stand-tablet should be a frame structure, on the front panel of which is a schematic diagram of the ZIL engine lubrication system. The design on the front panel must be protected from damage when using the stand using the lamination method.
The tablet stand must include: frame structure (PVC profile with a width of no more than 90 mm; fiberboard with a thickness of no more than 3 mm; PVC film with a full-color image with a resolution of at least 1400 dpi with an image of the ZIL engine lubrication system; a set of suspensions; an electronic logic device on based on the ADCS-P-5 controller, which implements four operating modes: radiator, compressor, bypass valve, pressure reducing valve; a complex of LED indications of the order of movement of the lubricant in the system circuits; four buttons for controlling operating modes).
The electrical circuit of the stand must be powered by a standard switching power supply. The power cord connector and power supply switch must be installed on the side panel of the stand.
Specifications:
power supply: alternating current frequency 50 Hz, voltage 220 V;
power consumption no more than 50 W;
overall dimensions, not less than 841x90x594 mm;
weight, no more than 5 kg.