Description

Composition:
1. Working stand:
1.1. L-shaped frame with two walls with removable panels made of laminated chipboard sheets and the frame of the industrial technical raised floor system.
1.2. 19″ 12U high wall mounted telecommunication cabinet.
1.3. 19″» open type telecommunication rack with a height of 42U.
1.4. Wire tray 100×200 mm.
1.5. Cable duct 100×60 mm.
1.6. A 50 liter container with a rectangular lid for storage and dispensing of consumables.
1.7. Unit for 8 sockets with the possibility of installation in a 19″» rack.
1.8. Metal cable manager (1U, 5 rings 60×40 mm) in the amount of 5 pcs.

2. Mounting place:
2.1. Mounting table 600x1200x500 mm.
2.2. Chair without armrests 600x1200x500 mm.
2.3. Universal bracket for mounting couplings.
2.4. Installation clamp for cables.
2.5. Portable source of additional lighting.
2.6. Folding carpentry workbench 750x620x550 mm.

3. Training and production equipment:
3.1. Optical fiber welding machine (welding of fibers with attenuation of no more than 0.02 dB and the possibility of shrinkage of 40 and 60 mm CRSS.
3.2. OLTS Optical Tester Complete with Cords.
3.3. Visual fault locator (output power not less than 5 mW and not more than 30 mW, universal port 2.5 mm (FC, SC, ST), batteries included).
3.4. Cable Tester + Tone Generator for Twisted Pair Cable.
3.5. Cordless drill driver with a set of bits (torque up to 17 Nm, torque adjustment, battery, charger included, set of bits PH1-2, PZ1-2, SL2-4, HEX6).
3.6. Technical hair dryer.

4. Occupational Health and Safety:
4.1. Workplace cleaning kit (brush, dustpan).
4.2. Garbage tank with a lid for 70 liters.
4.3. Containers for collection and disposal of chips of optical fibers.
4.4. Rubber floor mat.
4.5. The brush is soft.

5. Personal Protective Equipment:
5.1. Rubberized apron.
5.2. Safety glasses (GOST R 12.4.013-97 SSBT).
5.3. Gloves for working with liquids (3 pairs).
5.4. Gloves for installation work (3 pairs).
6. Toolbox
6.1. Tool trolley.
6.2. Metal hacksaw with spare blade.
6.3. Cable bites for steel cable.
6.4. Side cutters (2 pcs.)
6.5. Pliers.
6.6. Small Phillips screwdriver.
6.7. Large Phillips screwdriver.
6.8. Small screw screwdriver.
6.9. The screwdriver is large.
6.10. Roulette.
6.11. Exterior cutting knife Cable sheath with spare blade (2 pcs.)
6.12. Stripper for removing sheaths of copper cables.
6.13. Stripper for removing 250 μm fiber coating and 900 μm buffer.
6.14. Stripper-clothespin for removing modules.
6.15. Kevlar scissors.
6.16. Mounting knife.
6.17. Tweezers.
6.18. Metal ruler.
6.19. Propanol dispenser.
6.20. Set of wrenches.
6.21. Twisted pair stripping and trimming tool.
6.22. Crimper/Crimping Tool.
6.23. Tool for wiring in IDC contacts.
6.24. Percussion instrument for crosses of type 110.
6.25. Crimping pliers for Keystone modules.
6.26. Wood crown 20… 30 mm.
6.27. Flashlight with battery.
6.28. Level.
6.29. Container for CRSS.
6.30. Container for lint-free napkins.
6.31. Paper cutting scissors.
6.32. Caliper.
6.33. Square 90°.
6.34. Tool belt.
6.35. Talc.
6.36. Collapsible bucket.
6.37. Organizer for laying CRSS in the process of welding.
6.38. Cable tightening device.
6.39. Timer (2 pcs.)
6.40. Labels.
6.41. Magnets.
6.42. LC ferrule connector and adapter cleaner, SC.1. Working stand:
1.1. L-shaped frame with two walls with removable panels made of laminated chipboard sheets and the frame of the industrial technical raised floor system.
1.2. 19″ 12U high wall mounted telecommunication cabinet.
1.3. 19″» open type telecommunication rack with a height of 42U.
1.4. Wire tray 100×200 mm.
1.5. Cable duct 100×60 mm.
1.6. A 50 liter container with a rectangular lid for storage and dispensing of consumables.
1.7. Unit for 8 sockets with the possibility of installation in a 19″» rack.
1.8. Metal cable manager (1U, 5 rings 60×40 mm) in the amount of 5 pcs.

2. Mounting place:
2.1. Mounting table 600x1200x500 mm.
2.2. Chair without armrests 600x1200x500 mm.
2.3. Universal bracket for mounting couplings.
2.4. Installation clamp for cables.
2.5. Portable source of additional lighting.
2.6. Folding carpentry workbench 750x620x550 mm.

3. Training and production equipment:
3.1. Optical fiber welding machine (welding of fibers with attenuation of no more than 0.02 dB and the possibility of shrinkage of 40 and 60 mm CRSS.
3.2. OLTS Optical Tester Complete with Cords.
3.3. Visual fault locator (output power not less than 5 mW and not more than 30 mW, universal port 2.5 mm (FC, SC, ST), batteries included).
3.4. Cable Tester + Tone Generator for Twisted Pair Cable.
3.5. Cordless drill driver with a set of bits (torque up to 17 Nm, torque adjustment, battery, charger included, set of bits PH1-2, PZ1-2, SL2-4, HEX6).
3.6. Technical hair dryer.

4. Occupational Health and Safety:
4.1. Workplace cleaning kit (brush, dustpan).
4.2. Garbage tank with a lid for 70 liters.
4.3. Containers for collection and disposal of chips of optical fibers.
4.4. Rubber floor mat.
4.5. The brush is soft.

5. Personal Protective Equipment:
5.1. Rubberized apron.
5.2. Safety glasses (GOST R 12.4.013-97 SSBT).
5.3. Gloves for working with liquids (3 pairs).
5.4. Gloves for installation work (3 pairs).
6. Toolbox
6.1. Tool trolley.
6.2. Metal hacksaw with spare blade.
6.3. Cable bites for steel cable.
6.4. Side cutters (2 pcs.)
6.5. Pliers.
6.6. Small Phillips screwdriver.
6.7. Large Phillips screwdriver.
6.8. Small screw screwdriver.
6.9. The screwdriver is large.
6.10. Roulette.
6.11. Exterior cutting knife Cable sheath with spare blade (2 pcs.)
6.12. Stripper for removing sheaths of copper cables.
6.13. Stripper for removing 250 μm fiber coating and 900 μm buffer.
6.14. Stripper-clothespin for removing modules.
6.15. Kevlar scissors.
6.16. Mounting knife.
6.17. Tweezers.
6.18. Metal ruler.
6.19. Propanol dispenser.
6.20. Set of wrenches.
6.21. Twisted pair stripping and trimming tool.
6.22. Crimper/Crimping Tool.
6.23. Tool for wiring in IDC contacts.
6.24. Percussion instrument for crosses of type 110.
6.25. Crimping pliers for Keystone modules.
6.26. Wood crown 20… 30 mm.
6.27. Flashlight with battery.
6.28. Level.
6.29. Container for CRSS.
6.30. Container for lint-free napkins.
6.31. Paper cutting scissors.
6.32. Caliper.
6.33. Square 90°.
6.34. Tool belt.
6.35. Talc.
6.36. Collapsible bucket.
6.37. Organizer for laying CRSS in the process of welding.
6.38. Cable tightening device.
6.39. Timer (2 pcs.)
6.40. Labels.
6.41. Magnets.
6.42. Device for cleaning ferula connectors and adapters LC, SC.